Using the ULP-Triple Cable you can decrease or increase your energy at any point of the body. Wherever you place the self-adhesive electrodes, that is where you influence the energy level. This enables you to mobilize your self healing powers to any part or organ of your body under conscious will-power.

In order to carry out this exercise, use the ULP-Triple Cable.

Plug the connector of the triple cable into its receptable:

• grab the cable connector such that the screw points down.
• plug the connector into its receptable, the connection should be smooth and easy.
• grap the collar, push it forward und turn it to the right until it stops.
• the whole connection should now be solid.

If you want to influence a point on your right side of the body, proceed as follows:

• Attach the red-marked wire to a self-adhesive electrode and place it on the point you wish to influence.
• Attach the blue-marked wire to a self-adhesive electrode and place it on the same point of the opposite side of the body.

If you want to influence a point on your left side of the body, proceed as follows:

• Attach the blue-marked wire to a self-adhesive electrode and place it on the point you wish to influence.
• Attach the red-marked wire to a self-adhesive electrode and place it on the same point of the opposite side of the body.

Attach the third wire to a self-adhesive electrode on the neck.

Turn on the instrument by moving the power switch in the back of the instrument to the position "I". Read the values from the LCD-Displays

Interpret the Readings:    

• Values in the minus region show activity.
• The higher the value in the minus region, the higher the activity or energy level at the measurement point.

Start with visualizations. Should you desire to increase your self healing powers at a particular point in the body, try to increase the values in the minus region. If you raise your readings with the help of the exercises and the use of the PcE-Trainer on a regular basis, you will notice that your regeneration capacities have increased.

Aim of the Training:

• Try to get your readings into the minus region as much as possible, in order to increase your energy level in the measurement region.
  You will notice that the energy on both sides of the body will balance. This means, that life energy can flow without any obstructions to the measurement points and regeneration capacities increase.