In order to steer energy with the PcE-Trainer, you need the ULP-Triple Cable.

Plug the connector of the ULP-Triple Cable into its receptable:

• grab the cable connector such that the screw points down.
• plug the connector into its receptable, the connection should be smooth and easy.
• grap the collar, push it forward und turn it to the right until it stops.
• the whole connection should now be solid.

If you want to influence a varicose vein on your right side of the body, proceed as follows:

• Attach the red-marked end of the cable to a stick-on electrode and place this electrode as close as possible to the varicose vein or directly on it, if there is no open wound, and where you would like to influence the energy and measure it.
• Attach the blue-marked end of the cable to a stick-on electrode and place it on your left side of the body in the same position as the right one.

If you want to influence a varicose vein on your left side of the body, proceed as follows:

• Attach the blue-marked end of the cable to a stick-on electrode and place this electrode as close as possible to the varicose vein or directly on it, if there is no open wound, and where you would like to influence the energy and measure it.
• Attach the red-marked end of the cable to a stick-on electrode and place it on your right side of the body in the same position as the left one.

Always attach the red-marked wire of the cable to the right side of the body and the blue-marked wire of the able to the left side of the body. The electrodes should be placed symmetrically around the centerline of the body (always the same point on each side of the body) in order to influence energy in a balanced manner (increase or decrease).

• i.e.: You would like to influence the readings of a varicose vein on the left calf, attach the electrode with the blue wire there and the red wire on the right calf.
• i.e.: You would like to influence the readings of a varicose vein on the right inner thigh, attach the electrode with the red wire there and the blue wire on the left inner thigh.

At the end attach the third wire to a stick-on electrode placed in your neck.
Turn on the instrument by moving the power switch in the back to position "I".
Take readings.

Interpret the Values:

• Values with a minus sign show activity.
• The higher the minus value the higher the activity or energy in the legs.

Change the values through visualization just like with the biofeedback training. Think of something specific and watch how the values change. Experiment with this!

• Visualize how the energy flows out of the legs and flows evenly into the rest of the body. This will cause a change in the readings of the ULP-Values. Experiment with this!

The Aim of the Training:

• Try to move the Values as much as possible into the Plus Region in order to let the energy flow out of this area of the body, i.e. -220 left and -250 right should change to - 90 left and - 90 right (decrease in energy).
  
• If you train regularly you will notice, that the energy in both legs will equalize (=the same values for left and right side seen on the PcE-Trainer).

If you improve your energy distribution with the help from this training and you regularly practice the steering of energy with the PcE-Trainer, further problems with varicose veins should be avoided.